Summer Starts Here - Save up to 70%
Trailer Wiring Harness Installation - 2008 Mercury Mariner- Video
Today on our 2008 Mercury Mariner we'll be installing the tow package wiring harness with four pole trailer connector from Draw-Tite, part number 118251. Now we'll be installing this in conjunction with the four terminal relays, part number TR38665. To being we'll go ahead and install our four pole harness. Underneath the vehicle here on the drivers side at the read bumper we'll go ahead and locate the factory plug here. Now we'll need to remove the covering from the plug so we'll go ahead and detach it from the body of the vehicle and unplug the harness. Now that we've exposed the plug we can take our new four pole and clip it into the plug here on our factory harness. more
2/1/2013 10:31:20 AM
Trailer Wiring Harness Installation - 2007 Mercury Mariner- Video
Today we are working on a 2007 Mercury Mariner; we are going to install a tow ready T-One Connector part number 118430. Our first step is going to be accessing the rear cargo door of the vehicle. We are going to remove the tail light assemblies, and there is two fasteners holding it on. Once you remove the two fastener screws, gently pull and pry the tail light assembly away from the vehicle as there are several locking tabs behind that hold the tail light in place. As you can see the locking tabs here. Now Im going to go ahead and disconnect the tail light wiring from the sockets. more
10/19/2011 12:10:36 PM
Filter Videos
Filter Videos
